TAMPURA

Tambura

The tambura, tanpura, tamboura or taanpura is a long-necked plucked lute (a stringed instrument found in different forms and in many places). The body shape of the tambura somewhat resembles that of the sitar, but it has no frets – and the strings are played open. One or more tamburas may accompany other musicians or vocalists. It has four or five (rarely six) wire strings, which are plucked one after another in a regular pattern to create a harmonic resonance on the basic note (bourdon or drone function). An electronic tanpura is often substituted in contemporary Indian classical music performance.

Tamburas come in different sizes and pitches: larger "males", smaller "females" for vocalists, and a yet smaller version is used for accompanying sitar or sarod, called tamburi or tanpuri. Male vocalists pitch their tonic note (Sa), often to about C♯; female singers usually a fifth higher, though the tonic may be any note, as there is no absolute pitch in the Indian classical music systems. The male instrument has an open string length of approximately one metre; the female is three-fourths of the male. The standard tuning is 5-8-8-1 (sol do' do' do) or, in Indian sargam, PA-sa-sa-SA. For ragas that omit the fifth, the first string is tuned down to the natural fourth: 4-8-8-1 or Ma-sa-sa-Sa. Some ragas require a less common tuning with shuddh NI (one semitone below octave sa), NI-sa-sa-SA. With a five-string instrument, the seventh or NI (natural minor or major 7th) is added: PA-NI-sa-sa-SA (5-7-8-8-1)or MA-NI-sa-sa-SA (4-7-8-8-1).

The name tanapura is probably derived from tana, referring to a musical phrase, and pura, which means "full" or "complete". Both in its musical function and how it works, the tambura is unique in many ways. It does not partake in the melodic part of the music, but it supports and sustains the melody by providing a colourful and dynamic harmonic resonance field based on one precise tone, the basic note or key note. Also, it is not played in rhythm with the music. Its tempo is independent of the music it supports, and the speed of playing may vary throughout a performance or remain relatively constant, at the discretion of the player.

The special overtone-rich sound is achieved by applying the principle of jivari, which creates a sustained "buzzing" sound in which particular harmonics will resonate with focused clarity. Jivarefers to "soul", that which gives life, implying that the tambura embodies an "animated" tone quality. The principle of jivari can be compared to the prismatic refraction of white light into the colours of the rainbow, as its acoustic twin principle at work.

To achieve this effect, the strings pass over a wide, arched bridge, the front of which slopes gently away from the surface of the strings. When a string is plucked, it has intermittent periodical contact with the bridge; this intermittent grazing of the string and bridge is not a static process, as the points of contact will gradually shift, being a compound function of amplitude, the curvature of the bridge, and string tension. When the string is plucked, it has a large amplitude, moving up and down and contacting the bridge on the down-phase. As the energy of the string's movement gradually diminishes, the contact point of the string with the bridge slowly creeps up the slope to the top of the bridge, finally resting at the top of the bridge. Depending on scale and pitch, this can take between three and ten seconds. This dynamic process can be fine-tuned using a cotton thread between string and bridge: by shifting the thread, the grazing contact is shifted to a different position on the bridge, changing the harmonic content. Every single string produces its own cascading range of harmonics and, at the same time, builds up a particular resonance. According to this principle, tamburas are attentively tuned to achieve a particular tonal shade relative to the intonation-related qualities of the raga.

These more delicate aspects of tuning are directly related to what Indian musicians call raga svaroop, which is about how characteristic intonations strengthen the tonal impression of a particular raga. The tambura's particular setup, with its adjustable bridge, made it possible to explore a multitude of harmonic relations produced by the subtle harmonic interplay of four strings.

Tamburas are designed in three different styles:

§  Miraj style: the favourite form of tanpura for Hindustani performers. It is usually between three to five feet in length, with a well-rounded resonator plate (tabli) and a long, hollow straight neck. The round lower chamber to which the tabli, the connecting heel-piece and the neck (dandh) are fixed is actually a selected and dried gourd (tumba). Wood used is either tun or teak; bridges are usually cut from one piece of bone.

§  Tanjore style: this is a south Indian style of tambura, used widely by Carnatic music performers. It has a somewhat different shape and style of decoration from that of the miraj, but is otherwise much the same size. Typically, no gourd is used, but the spherical part is gouged out of a solid block of wood. The neck is somewhat smaller in diameter. Jackwood is used throughout; bridges are usually cut from one piece of rosewood. Often, two rosettes are drilled out and ornamented with inlaywork.

§  Tamburi: small-scale instruments, used for accompanying instrumental soloists. It is two to three feet long, with a flat bed-pan type wooden body with a slightly curved tabli. It may have from four to six strings. Tamburi are tuned to the higher octave and are the preferred instruments for accompanying solo performances by string-playing artists, as the lighter, more transparent sound does not drown out the lower register of a sitar, sarod, or sarangi.

Tanpura (India)

La tanpura, tambura o tambora, es un instrumento de cuerda pulsada de la India, que se usa para mantener sonidos zumbantes constantes. Es un instrumento de la misma familia de la vina, tiene una relación con la diosa Saraswati, patrona y musa de las Bellas Artes en el panteón hindú.

Está confeccionado con una gran calabaza, que hace de caja de resonancia,  la que sale un mástil de madera. Tiene cuatro cuerdas -aunque excepcionalmente hay tanpuras de 5 cuerdas- que se afinan para crear la armonía de la octava. Una afinación característica para obtener la base armónica de una Raga, tal como se les llama a las composiciones tradicionales indias, sería:

- 1ª cuerda se afina en la nota “sol”, que en la escala india corresponde a “pa”.

- 2ª y 3ª cuerdas se afinan en “do alto”, correspondientes al “sa alto” de la escala india

- 4ª cuerda (nota tónica o básica) se afina en “do básico”, “sa básico” en la escala india.

La unión de vibraciones de las distintas cuerdas crea sonidos intermedios que forman el fondo circular tan característico de esta música.

La tanpura ofrece la peculiar y mántrica constancia de su sonido y durante un concierto es como el faro o punto de referencia que el resto de músicos necesita para no extraviarse en sus largos paseos por estas composiciones libres de partitura. Generalmente es el propio músico solista quien comprueba -y retoca si así lo considera- la afinación de la tanpura justoantes de comenzar el concierto. Es un instrumento de gran belleza estética en su forma tradicional, pero el volumen de estas tanpuras hace complicado su transporte y en la actualidad los músicos habitualmente optan en sus desplazamientos por un diseño más funcional, en el que una delgada y rectangular caja de madera da la resonancia y  a la vez sostiene las cuerdas.